Air Tightness Tester: How to Operate the Air Leak Detector - PLUS Automation

Air tightnessA leak detector is a professional device used to measure whether gas leakage exists inside machines and equipment. In fields such as industrial production and automotive repair, using an air tightness leak detector enables faster and more accurate identification of leak points in machines and equipment. Therefore, correct operating procedures are critical to ensuring the accuracy and validity of test results.

      Air tightness leak detectorThe operating method may vary depending on the specific model and brand, but generally includes the following steps:

1. Preparation: Place the air tightness tester on a stable workbench and ensure that its power supply is properly connected. As required, select the appropriate leak detection probe and connecting tube.

2. Prepare the part to be tested: as needed, prepare the part to be tested, such as disassembly, cleaning, etc.

3. Connect the air source: Connect the air tightness leak detector to the air source, generally via an air hose. Make sure the connection is tight and reliable, with no leakage.

4. Set test parameters: According to the requirements of the part being tested, set the test parameters of the air tightness leak detector, such as pressure range, test time, etc.

5. Start testing: Connect the leak detection probe to the component under test and ensure a tight connection. Turn on the power switch of the air tightness leak detector to start testing. Observe the leakage status according to the indications on the display of the air tightness leak detector.

6. Analysis of results: Based on the readings displayed by the air tightness tester, determine whether the tested component has a leak problem. Corresponding repair measures can be taken as needed.

7. Ending the operation: After the test is completed, turn off the power switch of the air tightness leak detector, and remove the leak detection probe and connecting tube. Clean and tidy up the workbench, and store the air tightness leak detector properly. 

       It should be noted that when operating an air tightness leak detector, the operating instructions must be strictly followed to avoid improper operation or accidents during the process. At the same time, according to the specific maintenance needs and the requirements of the component being tested, select the appropriate air tightness leak detector and test parameters to ensure the accuracy and reliability of the test.